UOTEK RS232 RS485 RS422 to RS485 RS422 Addressable Converter Isolation Industrial Grade RS-232 RS-485 RS-422 Connector UT-5209

Parameter:
Compatible with RS-232, RS-485, RS-422 TIA/EIA standards
Software set address and communication baud rate
Automatic data transmission/reception without external flow control signal (RTS), true 3-wire (TXD. RXD. GND) system communication
Input interface: RS-232 and RS-485/422 interface
Output interface: RS-232 and RS-485/422 interface
Communication rate: 2400bps- 115.2K bps
Working power supply: 9-30VDC/350mA
RS-485/422 interface can connect 128 devices each way
Communication distance: 5000m (9600bps)
Power, data flow and fault detection indicators to detect fault points
Operating mode: Asynchronous half duplex (RS-485)
Optical isolation reinforced (isolation voltage 2.5KV rms / 500VDC insulation), special DC/DC module, RS-485 provides 600W per line for lightning, surge, ±15KV ESD protection and prevention of common ground interference
Electrical interface: Double decimal terminal blocks
Transmission medium: twisted pair or shielded wire
Dimension: 120mm×80mm×25mm
Operating environment: -40 to 85, relative humidity 5% to 95%
Suitable for all communication software used, plug-and-play

UT-5209 is used to establish the communications between computer systems and multiple identical equipments. Inside the converter it consists of a microprocessor. Every UT-5209 can be configured with a separate address. A computer is able to communicate with other equipments through UT-5209 along, which allows users to easily construct a 485/232 network.