Alphacool Eisblock XPX Pro Aurora Light CPU Water Block, Plexi

The Alphacool XPX Aurora Pro Light offers a clearer design. This eliminates the view of the water channels, giving a much clearer look to the coolant. The cooler has been specially optimized for AMD Threadripper, Intel LGA 3647 and 2011/2066 processors.

Alphacool uses an integrated aRGB solution. Under the black frame there are 14 D-RGB LEDs are mounted around the entire cooler. Each of these 5V aRGB LEDs can be controlled separately. The cable ends in a 3-pin JST connector with integrated Y-adapter to connect further Alphacool components directly. A corresponding 3-pin JST to 3-pin V adapter is included in the delivery.

The coldplate has been specially optimized for the large processor cores. A total of 147 cooling fins run over an area of around 42 x 58.6 mm. The entire cooler base is of course made of nickel-plated copper and not aluminium.

This is because the thermal conductivity of copper is known to be almost twice as high as that of aluminium.

The assembly is extremely easy. You remove the protective foil from the cooler bottom, spread some of the enclosed thermal paste on the CPU and then attach the cooler. Depending on the base, the mounting screws are screwed on before or after the cooler is put on. No tools are necessary for the installation. Alphacool uses knurled screws, which allow a quick and easy installation.

Technical data:
L x B x H: 63.8 x 79 x 22.5 mm
Net weight: 205 g
Material cooler bottom: Nickel Plated
Material top: POM
Connections: 2 x G1/4“
Thickness cooling fins: 0.2 mm
Illumination: Digital RGB LEDs
Power connector: Digital RGB LEDs 3-Pin JST (with integrated Y-Splitter)
Voltage: Digital RGB LEDs 5V

Compatible sockets:
INTEL: LGA 2066, 2011-3, 3647-0 Narrow/Square
AMD: TR4, SP3, sTRX4

Model: 12981