Specifications | Interfaces Telephone Interfaces Two (2) FXS ports Network Interfaces One (1) 10/100Mbps auto-sensing ethernet ports (RJ45) LED Indicators POWER, INTERNET, PHONE1, PHONE2 Factory Reset Button Yes
Voice, Fax, Modem Telephony Features Caller ID display or block, call waiting, flash, blind or attended transfer, forward, hold, do not disturb, 3-way conference Voice Codecs G.711 with Annex I (PLC) and Annex II (VAD/CNG), G.723.1, G.729A/B, G.726, iLBC, dynamic jitter buffer, advanced line echo cancellation Fax Over IP T.38 compliant Group 3 Fax Relay up to 14.4kpbs and auto-switch to G.711 for Fax Pass-through Short/Long Haul Ring Load 2 REN: Up to 1km on 24 AWG Caller ID Bellcore Type 1 & 2, ETSI, BT, NTT, and DTMF-based CID Disconnect Methods Busy Tone, Polarity Reversal/Wink, Loop Current
Signaling Network Protocols TCP/IP/UDP, RTP/RTCP, HTTP/HTTPS, ARP/RARP, ICMP, DNS, DHCP, NTP, TFTP, TELNET, STUN, SIP (RFC3261), SIP over TCP/TLS, SRTP, TR-069 QoS Layer 3 (ToS, DiffServ, MPLS) DTMF Method In-audio, RFC2833 and/or SIP INFO Provisioning and Control HTTP, HTTPS, TELNET, TFTP, TR-069, secure and automated provisioning using AES encryption, syslog
Security Media SRTP Control TLS/SIPS/HTTPS Management Syslog support, telnet, remote management using web browser
Physical Universal Power Supply Input: 100-240V AC, 50-60Hz Output: 5.0VDC/1.0A Environmental Operational: 32 degree – 104 degree F or 0 degree – 40 degree C Storage: 14 degree – 140 degree F or -10 degree – 60 degree C Humidity: 10 – 90% Non-condensing |
---|