HP Z240 PTC Creo Workstation i7-7700K 4 Cores 4.2Ghz 16GB 250GB NVMe M2000 Win 10

PTC Creo workstations are designed for optimal performance to give you the power you need to efficiently complete your work. Recommended for performance: Processors Speed Faster the better. Recommend 3Ghz or higher. Processor Cores Higher core counts are only utilized when rendering. We recommend 4 cores or more. Memory (RAM) 20x of your compacted central project file is a good rule of thumb. Recommend 16GB or higher. Storage Faster drives will improve overall workstation responsiveness. Its recommended to use a SSD for the Operating system and program loading, and HDD for file storage. Graphic Card (GPU) - Dedicated video cards supporting DirectX 11 or later are strongly recommended. This workstation is certified to work with PTC Creo.

Processor: Single Intel Core i7-7700K Quad Core 4.2Ghz Processor 4 Cores, 8 Virtual Cores in Hyperthreading Mode! (Additional processor configurations available)

Memory: 16GB DDR4-2133U Memory. Supports up to 64GB of total memory, 4 DIMM slots, supporting up to 64GB ECC/non-ECC, DDR4 2133 MT/s or 2400 MT/s speed depending on
the CPU selection.

PCIe Solid State Drive: 250GB NVMe M.2 SSD

Drive Bays: 2 external Half Height 5.25" Bays, 1 external 9.5mm Slim Optical Drive Bay, 2 internal 3.5" Drive Bays, and 1 internal 2.5" Drive Bay

Raid Controller: Integrated SATA Controller, RAID 0,1 supported: 4x 6 Gb/s ports.


Graphics: Nvidia Quadro M2000 4GB GDDR5 Graphic Card, DirectX 12 (Certified Hardware for PTC Creo)

Operating System: Windows 10 Professional 64-Bit Pre-Installed

Software: PTC Creo Software is not included

Power Supply: 400W power supply, 92% efficient

Optical: DVDRW Drive

Networking Integrated Intel® I219LM PCIe GbE Controller (Intel® vPro
with Intel® AMT 11.0)

Slots: 1 PCIe Gen3 x16 slot, 1 PCIe Gen3 x4 slot /x16 connector, 1 PCIe Gen3 x4 slot/x4 connector, 1 PCIe Gen3 x1 slot, 1 PCI slot 32-bit (optional), 1 M.2 slot (PCIe Gen3 x4)

Front Ports: 2 USB 3.0, 1 USB 2.0, 1 USB 2.0 Charging Data Port, 1 Headphone, and 1 Microphone

Rear Ports: 1 DVI-D Single Link and 2 DisplayPort (DP 1.2) outputs from Intel® HD Graphics (available on specific processors only); 4 USB 3.0 ports, 2 USB 2.0 ports, 1 serial port (optional), 1 parallel port (optional), 2 PS/2, RJ-45 (LoM), 1 Audio Line-in, and 1 Audio Line-out, Microphone; 2 IEEE 1394b ports (optional)


Internal Ports: 1 USB 3.0 and 3 USB 2.0 ports available as 2 separate 2x10 (3.0 x1, 2.0 x1) and 2x5 (2.0 x2) header: supports one HP Internal USB 2.0 Port Kit and one USB 3.0 Media Card Reader.

Peripherals: Power Cable Included. Mouse, Keyboard, and Video Cable Not Included.

Condition: Seller refurbished unit may have minor scratches and scuffs

*Systems are built to order and fully customizable. Please call for more information. Note that a stock photo is used and unit may differ depending on configuration.