DisplayPort 1.4 to 3 DisplayPort MST Hub Video Splitter 8K30Hz - DisplayPort Splitter 1 in 3 Out, Multi Stream Transport DisplayPort Hub,DP Daisy Chain Monitor Adapter for Windows

NEW 1x3 DisplayPort Splitter: Split one DP signal into 3 signals. Supports output of 3 same screens in mirror mode or 3 different screens in MST mode. In MST expansion mode, the single port output can reach 8K@30Hz 4K@144Hz, and the three ports output can reach 4K@60Hz at the same time .MST mode of Apple system can only extend one screen (limited by iOS System) .when using, please make sure to use USB cable to power the Splitter switcher.

This super slim 1x3 DP splitter is compact and efficient. It allows you to distribute one HD source to three displays simultaneously without any signal loss. The system is compatible with DP1.4, DP1.3, DP1.2, DP1.0, Support 3D and 4K, 8K ultra HD, Support SST and MST. The integrated graphics device may have compatibility issues with the DP splitter due to video memory limitations and insufficient bit width. Please run it on the computer where the discrete graphics card is installed.

Support operating system: Apple (iOS) system, Windows system, Android system.pls make sure that the DP soure has already implemented full support for MST/SST. Splitter Support SST (Mirror) and MST (Extended) mode ,Support HDR 4:4:4, 4:2:2, 4:2:0. DP cable direct connections are recommended for reliability and compatibility. this Displayport MST SST splitter does not work with any dock.The length of the DP cables connected to both ends of the Splitter should not exceed 3 meters respectively.

DisplayPort Splitter Specifications: Single port display(8K@ 30Hz 7680x4320 ) ,Single port display (4K@ 144Hz 3840x2160),1 to 3 operation supports 4K@60Hz image.Compatible resolution: 8K@30Hz 4K@144Hz, 120Hz, 60Hz 1440P@165Hz, 144Hz, 120Hz, 60Hz 1080P@240Hz, 165Hz, 144Hz, 120Hz, 60Hz (Depends on your graphics card, monitor, operating system and DP cable support).

Note :If you would like to output 8K@30Hz , 4K@144Hz via our splitter in your displays,please make sure your source devices,your cable and your monitors can all support the resolution and refresh rate you need to output. And used under a single port.Vesa certified Displayport cable is needed(most screen flickering or vidoe on/off are caused by non-qualified Displayport cable). If you output an 8K signal, we recommend using an DP 1.4 8K standard cable.

Specifications:
8K: Single port 7680x4320 @ 30Hz display
4K: Single port 3840x2160 @ 144Hz

Support resolution:
8K@30Hz
4K@144Hz, 120Hz, 60Hz
1440P@165Hz, 144Hz, 120Hz, 60Hz
1080P@240Hz, 165Hz, 144Hz, 120Hz, 60Hz
(Depends on your graphics card, monitor, operating system and DP cable support)

Package Contents:
1 x DP splitter host
1 x U SB A t o U SB Micr o B power supply line
1 x User Manual