TDS Meter Digital Water Tester,Professional 3-in-1 TDS, Temperature and EC Meter with Carrying Case, 0-9999ppm, Ideal ppm Meter for Drinking Water, Aquariums and More

TEST YOUR WATER

How Pure is Your Water? With the push of a button, the TDS water tester can tell you your overall water purity level, which will be displayed on the screen in ppm (parts per million)



EASY TO USE AND ACCURATE

Just stick it in about 1 inch of water instantly you get the reading. It's compact and doesn't need any maintenance. The TDS water tester is a rugged model that includes a protective carrying case with a belt clip



AUTO-OFF AND HOLD FUNCTION

The TDS tester shuts off automatically after 2 minutes of non-use to conserve batteries. Features a hold function that saves measurements for convenient reading and recording



MEASUREMENT RANGE

0-9990 ppm. From 0-999 ppm, the resolution is in increments of 1ppm. From 1000 to 9990 ppm, the resolution is in increments of 10ppm, indicated by a blinking 'x10' image



Features:

1.This is a digital TDS meter tester to test the filter water quality purity, to check the performance of your water filter, to check for hardness (1grain=17ppm), to make sure you always drink pure water. Saves measurements for convenient reading and recording New Arrival

2.Automatic temperature compensation

3.Shift between TDS and Conductivity



Specifications:

Conductivity:0-9999 us/cm

TDS:0-9999 ppm

Celsius:0.1-80.0?

Fahrenheit:32.0-176.0?

Accuracy:±2%

Battery:3V CR2032 Button Battery (Included)



How to use it:

1.Please unplug the electrode sleeve before use.

2.Press the switch, place the electrode into the test solution.

3.After the numerically stable, press the HOLD button and take it out of the solution to read.

4.After reading, turn off the meter, wipe clean the electrode before sleeving it.



Warm Tips:

Please don't store the TDS under high temperature and direct sunlight.

Please don't drop the entire TDS meter in the water or dip beyond the maximum immersion level.

Keep the electrode clean, cover the protective cap, please take out the bateries if idle for long periods.

Please adopt standard buffer solution calibration, incorrect calibration would cause measurement error, thus affect the accuracy of the test solution, or cause the instrument not to work properly.