Holiday Shipping Details & Extended Holiday Returns 
Do you know how much moisture is in your walls or ceilings?
Do you know if the firewood you will be using is sufficiently dry?
Do you know how to avoid skirting board rot and corner mold?
DURFICST knows!
The pinless moisture meter uses a dielectric measurement method that eliminates the need to insert electrodes or probes into the material to be measured. The high frequency sensor technology allows the moisture meter to detect moisture content at a depth of 20-40mm below the surface of the object, and the moisture measurement is absolutely non-destructive.
All capacitive types none of the moisture indicators directly determine the moisture content in the masonry as a percentage, but rather a physical index of moisture and building material type that depends on it! Different materials have different moisture ranges. For details, please refer to the moisture comparison table in the manual.
The DURFICST pinless moisture meter allows users to evaluate the moisture content of various materials without penetrating the surface, quickly and non-destructively indicate the moisture distribution of the surface of the measured object at a depth of 20-40mm, the spherical probe can measure small spaces and cover a wide area.
The small ball probe allows users to easily measure objects in tight spaces without leaving a trace, such as moisture content around corners, uneven surfaces and baseboards.
When the humidity exceeds 30, the Wood Moisture Meter will beep. In the "HOLD" mode, you can press the "SET" button to set the alarm value. The default alarm value for "RISK" is 30 and the default alarm value for "WET" is 60.
The easy-to-read high-definition color display warns and informs of dry, transitional and wet spots on the wall in the form of "DRY", "RISK" or "WET", while the colored analog bar clearly shows the range of humidity values, very easy to read.
To conserve battery power, if no operation is performed within 30 minutes of powering up, the moisture analyzer will automatically shut down; press and hold the "MEAS" key in the shutdown state to power on to cancel this function.
Every time after power on, press the "MEAS" button once, the calibration can be completed within 3 seconds, which can quickly complete the accurate measurement.
