Brake Fluid Liquid Tester, Automotive Brake Fluid Content Detector, Vehicle Brake Diagnostic Testing Tool, Hydraulic Fluid Liquid Tester Pen Oil Moisture Tester Analyzer Meter for DOT3 DOT4 DOT5.1

Features:

Water Content Value Display: Automatic alarm for excessive brake oil and water content, and support multiple oil detection DOT3/DOT4/DOT5.1.

High Precision Metal Probe: Accurate measurement, long service life, not easy to rust.

Function Switch Key: After starting, press S key to switch to DOT3/DOT4/DOT5.1, and press S button to switch the brake oil type (default is DOT3).

Energy Saving & Low Power Consumption: After about 5 minutes, without any operation, the instrument will automatically shut down.

Pen Clip Design: The back is designed with a pen clip for easy carrying.

Audible & Visual Dual Prompt: When the water content of brake oil is detected, the display screen and buzzer will give dual prompts.

HD Tri-Color Backlight: The high-definition 3 color backlight screen automatically matches the backlight of the appropriate color according to the measured content.

Tips:

Our product comes with a screen protector. lf there are some scratches on screen protector, you can remove or keep the protector.

Please wipe the probe clean before or after using, otherwise it will affect the results

Multi-Oil Type Detection Brake Fluid Tester

This brake fluid tester supports multiple types of brake fluid, it can be used to detect brake oil DOT3, DOT4, DOT5.1.

DOT3 is the most common type of brake fluid used by daily drivers and it is also the default brake oil type when the brake fluid tester power on; DOT4 has a higher boiling point and has found its place in racing vehicles and police cars. DOT5 mainly used in special vehicles such asracing cars, but rarely used in passenger cars.

3 types of brake fluid, one-button switching for easy detection.

Package:

1 x Brake Fluid Tester, 1 x User Manual (English)

Specification

Display: LCD

Moisture detection range: 0%~4%

Accuracy: ± 0.3%

Water content of brake oil: 0~2%, which can be used normally

Water content of brake oil: less than 2.5%, still usable

Water content of brake oil: more than 3%, replacement required

Operating temperature: 0 ~40

Alarm mode: Audible & visual

Probe format: Oval

Backlight: Red, yellow and green backlight

Auto power off: Auto power off after about 5 minutes if there are no operation.

Battery undervoltage indicator: Yes

Power supply: 2x1.5v AAA battery

Size: About 157x27x23mm/6.18x1.06x0.91inch

This brake fluid tester is easy to use. 1. After install the batteries, gently remove the cap, hold on the power key for more than 1second. After the buzzer beeps, the screen lights on, and then choose the current oil type you want to test. 2. Insert the test probe into the brake fluid and immerse it in the liquid surface at most 2-5mm (please wipe the probe clean before or after using, otherwise it will affect the results). 3. Check the results through the display.