ROCKFORD FOSGATE T1000-4ad 1000 Watt 4-Channel Car Audio Amplifier

This brand new Rockford Fosgate T1000-4ad 1000 Watt 4-Channel Car Audio Amplifier is the perfect amplifier for you, and with 1000 watts divided between 4 channels, you will never run out of bass pumping power. This amp features Class-AD tecnology that allows the amp to produce more power with less current draw from the vehicle; Constant Power provides the ability to instantaneously deliver maximum output power to the speakers without regard to its varying impedance; Differential Inputs that eliminate noise picked up by signal cables; DSM that utilizes 1% tight-tolerances improving efficiency of the circuit; Dynamic Thermal Management (DTM) evenly distributes excess heat across the entire amp heatsink; MEHSA3 which reduces MOSFET temps and lowers distortion; NOMAD is a "real time" analog computer that protects the amp from shorting speaker wires; Punch EQ2 an onboard equalizer with up to +18dB @ 35Hz and/or up to +12dB boost at 12kHz.

This T1000-4ad amplifier offers state-of-the-art technology, and also includes a MOSFET power supply, RCA pass-thru, Audiophile grade speaker connections, 4-gauge power/ground terminals, a 24dB/ octave crosser, 2/4 channel switch, and a MOSFET output stage. Experience superior sound quality when you use the Rockford Fosgate T1000-4 1000 Watt 4-Channel Car Audio Amplifier.

- Total Power: 1000 Watts RMS
- RMS Continuous Power Rating:
- 250 Watts x 4 @ 4-Ohm
- 250 Watts x 4 @ 2-Ohm
- 250 Watts x 4 @ 1-Ohm
- 500 Watts x 2 @ 4-Ohm Bridged
- 500 Watts x 2 @ 2-Ohm Bridged
- Dynamic Power PVC Power Cube Measurement:
- Front Channels:
- 290 Watts x 2 @ 4-Ohms 0° Res
- 290 Watts x 2 @ 2-Ohms 0° Res
- 290 Watts x 2 @ 1-Ohm 0° Res
- Rear Channels:
- 290 Watts x 2 @ 4-Ohms 0° Res
- 290 Watts x 2 @ 2-Ohms 0° Res
- 290 Watts x 2 @ 1-Ohm 0° Res
- Efficiency:
- 84.1% @ 4-Ohm Full Power
- 81.6% @ 2-Ohm Full Power
- 81.0% @ 1-Ohm Full Power
- Crossover Controls:
- Front Channels:
- High-Pass (HP): 50Hz-500Hz @ 24dB/octave Butterworth
- Low-Pass (LP): 50Hz-500Hz @ 24dB/octave Butterworth
- Rear Channels:
- High-Pass (HP): 50Hz-500Hz @ 24dB/octave Butterworth
- Low-Pass (LP): 50Hz-500Hz @ 24dB/octave Butterworth
- Tone Controls:
- Front Channels:
- Treble: 0dB to +12dB @ 12kHz
- Bass: 0dB to +18dB @ 45Hz
- Rear Channels:
- Treble: 0dB to +12dB @ 12kHz
- Bass: 0dB to +18dB @ 45Hz
- Function depends upon crossover setting (LP/AP/HP)
- Signal Input:
- Front Channels:
- 1 RCA pair
- Rear Channels:
- 1 RCA pair
- Bridgeable: Yes
- Signal Output: 1 RCA Pair
- Power Input Connector: Block
- Power Wire Gauge: 4 AWG
- Speaker Output Connector: Block
- Speaker Wire Gauge: 8 AWG - 16 AWG
- Heat Sink Type: Cast Aluminum
- Cooling: Convection
- Visual Indicators:
- Power (Blue LED)
- Thermal (Red LED)
- Protect (Yellow LED) - 2/4 channel switch
- Circuit Topology Class: Class A/D
- MOSFET output stage
- MOSFET power supply
- Audiophile grade speaker connections
- 24dB/octave crossover
- RCA pass-thru
- Bass Boost
- Frequency response: 20Hz to 20kHz +/-1dB
- CEA-2006 Compliant Amplifier