WS-C2960S-48LPD-L 2960-S Series GE Switch 2960S-48LPD Layer 2 - Gigabit Ethernet Switch - 48 x 10/100/1000 PoE Ports - 370W - 2 x 10G SFP - LAN Base

Device Type Switch - 48 ports - Managed
Enclosure Type Rack-mountable - 1U
Ports 48 x 10/100/1000 + 2 x 10 Gigabit SFP+
Power Over Ethernet (PoE) 370 Watts
Performance Switching capacity: 176 Gbps
Forwarding performance (64-byte packet size): 101.2 Mpps
MAC Address Table Size 8K entries
Remote Management Protocol SNMP 1, SNMP 2, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, HTTPS, TFTP, SSH
Encryption Algorithm SSL
Authentication Method Secure Shell (SSH), RADIUS, TACACS+
Features Layer 2 switching, auto-sensing per device, dynamic IP address assignment, power over Ethernet (PoE), auto-negotiation, BOOTP support, ARP support, load balancing, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Syslog support, DiffServ support, Broadcast Storm Control, IPv6 support, Multicast Storm Control, Unicast Storm Control, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Access Control List (ACL) support, Quality of Service (QoS), PoE+, Link Aggregation Control Protocol (LACP), Port Security, MAC Address Notification, Remote Switch Port Analyzer (RSPAN)
Compliant Standards IEEE 802.3, IEEE 802.3 u, IEEE 802.3 z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3 ab, IEEE 802.1 p, IEEE 802.3 af, IEEE 802.3 x, IEEE 802.3 ad (LACP), IEEE 802.1 w, IEEE 802.1 x, IEEE 802.1 s, IEEE 802.3 ah, IEEE 802.1 ab (LLDP), IEEE 802.3 at
RAM 128 MB
Flash Memory 64 MB Flash
Status Indicators Port status, link activity, port transmission speed, port duplex mode, power, system
Expansion / Connectivity
Interfaces 48 x 10Base-T/100Base-TX/1000Base-T - RJ-45 - PoE
USB: 1 x 4 pin USB Type A
1 x console - mini-USB Type B - management
1 x console - RJ-45 - management
1 x 10Base-T/100Base-TX - RJ-45 - management
2 x SFP+
Expansion Slot (s) 1 (total) / 1 (free) x Stacking Module
Power
Power Device Power supply - internal
Voltage Required AC 120/230 V ( 50/60 Hz )
Power Consumption Operational 71 Watt
Miscellaneous
Width 17.5 in. ( 44.5 cm)
Depth 15.2 in. ( 38.6 cm)
Height 1.8 in. ( 4.5 cm)
Weight 13 lbs ( 5.77 kg)
Rack Mounting Kit Optional
MTBF 198, 300 hour (s)
Compliant Standards TUV GS, CISPR 22 Class A, GOST, BSMI CNS 13438 Class A, CISPR 24, NOM, VCCI Class A ITE, EN55024, CB, EMC, MIC, IEC 60950-1, EN 60950-1, UL 60950-1 Second Edition, RoHS, CSA C 22.2 No. 60950-1, FCC Part 15 B Class A