Features:
Product specification:
1 x Standard 3.5" IDE hard disk driver 40pin male connector
1 x Standard big 4 pin power connector
1 x Standard SD socket.
Support PIO, Multi-word DMA, Ultra DMA Host data transfer mode.
Compatible with DOS, Windows 98SE, Me, 2000, XP and Vista & Linux.
Bootable, install OS and application on SD card.
D-IDE conversion interface board instructions:
The power supply seat can be supplied with a power supply by a hard disk. The card can only be powered by 5V, and the normal working voltage is 5V + 0.25V. Operating current less than 200mA.
IDE socket, please select 80 PIN hard disk connection line.
SD socket supports maximum 4GB SD card.
Connect the power and the IDE cable. After the SD socket is inserted into the SD card, the conversion board is equivalent to an electronic hard disk without installing the driver. After installing the operating system, you can start the operating system via the SD memory card (such as windows98, etc. ).
The data rate is high, roughly the same speed as the system hard disk drive (ATA/133, U-DMA, Mode3).
Easy installation
Mini board design and no space wasted.
Notice:
Some of the mother board required to enable LBA mode and disable DMA transfer mode.
Due to the different monitor and light effect, the actual color maybe a slight different from the picture color.
Include
1 x SD To IDE 40P 3.5" Adapter