LCD Display Power Supply Tester for PC Power Supply ATX/ /BTX/ITX/TFX For Computer

Overview: The LCD power supply tester is a robust voltage, tester for PC-power supply, ATX, BTX, ITX and TFX, power supplies can be tested. The LCD displays various parameters such as output voltage and PG. When the parameters exceed the normal value, the buzzer will give a warning sound, and the corresponding values will flicker. LCDs indicate the status of voltage. The PC/ SPS is suitable for the ambitious hobby user, as well as for a quick functional check in specialized trade.
Method of operation:
1. Insert 20PIN or 24PIN and P4, P6 or P8 plugs into the corresponding position of the power tester. If you plug in 20PIN or 24PIN interface tester to alarm and display LL, you need to plug in 4P. Please confirm that 4P must be inserted in 4P position! )
2. Turn on the power supply, while "droplet" sound two boots, if the values of each group are not flickering, it means that the input power supply of this power supply is normal.
3. If the voltage signal of a circuit is not detected (such as 20PIN or 24PIN connector) or the detected voltage exceeds the normal range, the buzzer will emit a warning sound of "droplets" for a long time, and the corresponding voltage or PG value display state is flickering state, then the power supply is a fault power source!
Specification: 1. Supports 20Pin, 24Pin ATX interfaces 2. Support SATA/IDE interface 3. Supporting 4Pin and 8Pin interfaces 4. Supporting PCI-E graphics card 6Pin interface
5. Supporting molex/Xeco power interface 6.
Voltage test: +12V, -12V, +5V, -5V, + 3.3V, +5V Stand by (SB), 12V power Good ( PG ) 7.
Connectors: Floppy, HDD(SATA+IDE), CD-ROM, 4pin ( P4 ), 8pin ( Dual-CPU ), 6pin ( PCI-Express )
Package Included: 1 x LCD Power supply tester