PCI-E M2 NVME Expansion Card M2 NVME to Type-C Front TYPE-E A-KEY 20PIN Extension USB3.2 5Gbps Adapter Card(19P)

Features:
With the popularization of USB 3.2, more and more chassis will provide TYPE-E or 19pin front USB interfaces to switch- to the front of the chassis, but old motherboards do not support USB 3.2 or interfaces without TYPE-E or 19pin! You can convert the PCI-E signal to the USB 3.2 GEN1 19pin interface or TYPE-E interface through the M2 slot on the motherboard-, which allows you to plug- the 19PIN or TYPE-E of the panel into the expansion card. This provides a front ultra-high-speed USB 3.2 interface, which is very convenient!
The main-control chip adopts USB NEC- and is also the third generation product D720202. It is one of the few expansion cards on the market that can support the LINUX-system
To work-, it is necessary to plug- in the-power interface.
The expansion card adopts an inductive capacitor, greatly ensuring the stability of USB power-supply.
Hardware requirements: One motherboard- or laptop that supports M2 KEY-M NVME
This product is a PCI-E or NVME expansion card, please do not plug- it into the M2 slot.

Specifications

:
Optional Type: 19Pin / Type-E
Compliant with PCI-Express 2.0
Complies with USB 3.0 SuperSpeed 1.0
Complies with xHCI specification-version 1.0
Main-control chip: Renesas- uPD720202 chipset
The maximum transmission rate is up to 5Gbps, much higher-than the 480Mb of USB 2.0, up to 10times;
Downward compatibility with USB 2.0, USB 1.1, and USB 1.0
Transmission rate: 5000/480/12/ 1.5M bps
Built-in small 4PIN enhanced power-interface
Supports USB hot swapping function
Support WindowsXP/2003/Vista-/win7/win8/2003/MAC- 10.8 or higher-systems.
Package Includes:
1pc M2 NVME Adapter Card
Note:
Due to the problems of lighting effects and angles, there will be certain tolerances in the product, please understand.
Please allow 0-1cm error due to the manual measurmenv