FT232RL USB TO 25PIN DB25 MALE RS232 ADAPTER SERIAL COMMUNICATION CABLE FOR KANTRONICS KPC2 KPC-3+ AND ARM DEBIAN TNC KABLE (FT232RL Chip) Cable length:5M

FT232RL CHIP USB TO 25PIN DB25 MALE CONNECTOR RS232 SERIAL ADAPTER CABLE FOR KANTRONICS KPC2 KPC-3+ AND ARM DEBIAN TNC KABLE
This cable is designed to make connection between USB port and serial devices (RS232), NOT for parallel printer or other devices based on parallel protocol (IEEE-1284), even though both have DB25 connector. It is a USB to Serial cable with Software Handshaking using only three signals: TXD (2), RXD (3), RTS (4), CTS (5), GND (7). Please doubel check your devices setup prior to purchase.
Works with Kantronics KPC2, KPC-3+ and ARM debian Successfully interfaced our Kantronics TNCs to a raspberry pi running Debian without a hitch. It has indicator lights inside the clear USB end to indicate activity. Connector appears to be well-assembled.
Operating Systems:
Windows
10/8/ 8.1 /7/Windows Server 2008/2003/Vista/XP/98
Linux
Mac
OS X/9/8
Windows
CE. NET (Version 4.2 and greater)
Android
32 and 64 bit operating systems are both supported.
DRIVER DOWNLOADING:
https: //chip. com/drivers/vcp-drivers/
INSTALLATION GUIDELINE:
https: //chip. com/document/installation-guides/
Package Contents:
1 X USB to DB25 Cable
Length: 1.8M /6FT, 3.0M /10FT, 5.0M / 16.4FT (Approx. )
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing.
If you have special requirements, such as cable length, wire gauges and pinouts, please consult to me online or leave me a message.
If you receive the goods, and have any dissatisfaction or need assistance, please feel free to contact me or leave me a message.
usb rs232 to DB25 connector cable, usb serial connector to db25 cable, usb TNC programming cable, TERMINAL NODE CONTROLLER cable