DX4 Print for Head Printhead for Roland 540 MIMAKI JV2 JV4 Eco Solvent

Features:

1. Before installing the nozzle, it is first necessary to ensure that the UV printer moves normally, the ground wire is connected properly, the voltage on the car board is normal, and the voltage provided by the pressure head is normal.

2. Use software to test all aspects of the machine operation, confirm that it is normal, the grating reading is normal, and the indicator light is normal. it is best to wear an electrostatic ring on your hand. Be sure to turn off the power and unplug the power cord during the installation process.

3. Check if there are raised marks on the flat wire and if it is flat. Insert it firmly on the nozzle without any tilting. The end of the nozzle assembly line is generally divided into two sides, one side needs to contact the circuit, and the other side does not need to contact the circuit to ensure that the direction is not incorrect. After insertion, it is best to check several times to confirm that there are no issues.

4. Instructions for connecting the car head wire to the vehicle board: First, ensure that there is no electricity before operating. The corresponding position of the line can be clearly seen from the head. If there is hesitation or uncertainty, please do not try. You can consult the manufacturer for the correct cable position, once connected in the wrong place, it is very likely to damage the print head.

5. After installation, confirm repeatedly and then turn on the power. Before starting the print head, pump ink into the print head. Then check if the nozzle is normal.

6. Do not let UV ink drip onto the data line. Because ink flows down the data cable, it will directly enter the circuit, causing a short circuit and directly burning the nozzle.

7. Remember to manually remove the ink cartridge before starting the machine. In addition, the temperature in the workshop should be maintained at around 25 C. It is best to use it frequently.

Specifications

:
Product Name: DX4 Print for Head Printhead Printer for Head
for: forE-pson Roland 540 MIMAKI JV2 JV4 Eco Solvent Printer
Material: ABS+Metal
Item Color: Black
Size: Standard
Package Includes:
1PC x Printer for Head
Note:
If you donfor t know whether it is suitable for your own model, please consult customer service before placing an order.
Due to the problems of lighting effects and angles, there will be certain tolerances in the product, please understand.
Please allow 0-1cm error due to the manual measurm