Your Browsing History
Holiday Shipping Details & Extended Holiday Returns - Free 30-day Returns
$25.99
Ships from United States.
Fees for brokerage and duty included in price.
Sold by OVERTURE 3D
Shipped by OVERTURE 3D
Meet Your Seller
Visit OVERTURE 3D Store
FOLLOW
OVERTURE ABS 1.75mm Filament 3D Printer Filament, 1kg Spool (2.2lbs), Dimensional Accuracy +/- 0.03 mm, Fit Most FDM Printer
- [Less Odor, Less Warping & Bubble-Free]--This ABS is made with a specialty bulk-polymerized ABS resin, which has significantly lower volatile content compared to traditional ABS resins. It delivers excellent printing quality with minimal odor and low warpage during printing. Complete drying for 24 hours before vacuum packaging. Enclosed chamber is required for better printing quality and durability when printing big parts with ABS filaments
- [High Stability and Durability]-- OVERTURE ABS Roll are made by commonly used ABS, a strong and tough thermoplastic polymergreat for creating parts which needs to be resistant to high temperatures; Due to the high stability and various post-processing options (sanding, painting, gluing, filling), our ABS filaments are excellent choice for engineering production or prototyping
- [More Humanized Design & Easy to Use] -- With length/ weight gauge and viewing hole on the reel so that you can easily figure out the remaining filaments; more filaments clip
+
+
Overview
Specs
Reviews
Note: The recommended print setup for Overture filaments could be slightly different from other filaments; Pls read the description below, you may also get some practical suggestions through QA/ Top Review from others.
FAQs:
Why can't the filaments stick to the build bed?
1. Check the temperature setting before printing, ABS filaments have higher extrusion temperature;
2. Check if the plate surface has been used for a longtime, it is recommended to replace it with our new one to ensure an strong first layer adhesion;
3. If the first layer has poor adhesion, it is recommended to re-level the print substrate to reduce the distance between the nozzle and the surface plate;
4. If the effect is not good, it is recommended to try printing the draft before printing.
Specification:
Recommended Extrusion/Nozzle Temp: 245 °C - 265°C (473~ 509 ),
Heated Bed Temp: 80°C - 100 °C (176~ 212)/ PVP stick helps
Printing Speed: 30~70 mm/s (1, 800~4, 200mm/ min)
Fan: Low for better surface quality; Off for better strength
Raft
Filaments Diameter and Accuracy: 1.75 mm +/- 0.03
Filaments Net Weight: 1 kg ( 2.2 lbs)
Packaging Included:
1 × spool of ABS filaments
FAQs:
Why can't the filaments stick to the build bed?
1. Check the temperature setting before printing, ABS filaments have higher extrusion temperature;
2. Check if the plate surface has been used for a longtime, it is recommended to replace it with our new one to ensure an strong first layer adhesion;
3. If the first layer has poor adhesion, it is recommended to re-level the print substrate to reduce the distance between the nozzle and the surface plate;
4. If the effect is not good, it is recommended to try printing the draft before printing.
Specification:
Recommended Extrusion/Nozzle Temp: 245 °C - 265°C (473~ 509 ),
Heated Bed Temp: 80°C - 100 °C (176~ 212)/ PVP stick helps
Printing Speed: 30~70 mm/s (1, 800~4, 200mm/ min)
Fan: Low for better surface quality; Off for better strength
Raft
Filaments Diameter and Accuracy: 1.75 mm +/- 0.03
Filaments Net Weight: 1 kg ( 2.2 lbs)
Packaging Included:
1 × spool of ABS filaments
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by OVERTURE 3D Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...