ADT-LINK Riser PCI-E 3.0 16x to x1 PCIe x16 x1 PCI Express Riser Mining Graphics Card Extension Cable R13SC 25cm with Power Line (with Power Cable)

Wire advantage, using imported German patent wire, using high-quality PCIe connector, high-frequency support PCIe 3.0 8G / bps stable transmission The BIOS does not need to adjust the speed reduction. The core wire of the wire contains a power supply. With the mining motherboard, the PCIe extension cable does not require an external power supply and can be used directly when the graphics card is inserted.
Line length advantage, from 3 cm to 1 m can be customized.The adapter cable sold by our store has low wire impedance. The cable length within 60 cm can support PCIe3.0 full speed steadily.
The differential signal has no via hole design, there is no signal attenuation and interference problems of parasitic capacitance and parasitic inductance, and there will be no CAF micro short circuit phenomenon. The PCB uses high-frequency and low-resistance high-quality materials. The PCB is precision-made. The product is durable.
PCB dwarfing and fat design, the dwarf will not get stuck to the graphics card, and the fat and long design makes the board easier to install, and the probability of damage is low.The thickness of the material is thickened to 1oz, the gold content of the gold finger is sufficient, and the gold-plated foot has good electrical conductivity, can reduce the blue screen problem caused by the increase of oxidation and rust resistance. Copper thickening can increase the power supply capacity to 36W.
Choose high-quality connectors, connector opening design, in addition to x1, you can also insert x4 x8 x16 board graphics card, strong hardware compatibility board. The product is simple and easy to use, 100% power on delivery test. Failure rate is less than 5 per thousand.