R11S PCIe 3.0 x1 to x1 Extension Cable EMI Shielding 8G/BPS High Speed PCI Express 1x Riser Card Extender Ribbon Cable (45cm,R11SF-F Open Type)

Supporting PCIe 3.0 8G/bps full-speed stable transmission,PCIE 3.0 transmission efficiency more than 2%.Eight CARDS measured, directly into the motherboard graphics with directly, PCIE extended without power supply, without setting the BIOS, without secondary USB transfer..From 3 cm to 1 meter can be customized. The cable impedance is low, the cable length within 60 cm supports PCIe3.0 full speed.
The closed type is more compact and not easy to fall off after being inserted into the sound card; the open type can be inserted into a network card above X4, which is more flexible in use.The sound card extension cable is usually closed-end type -5cm. If your card is far away from the motherboard, please measure the distance yourself and select the appropriate cable length.
Differential signal has no via hole design. There is no signal attenuation interference problem of parasitic capacitance and parasitic inductance, and there will be no CAF micro short circuit phenomenon, and the product is durable.The PCB is designed with short and fattening, which will not get stuck on the graphics card. The fattening and long design makes the board easier to install and reduces the chance of damage.
The product is made of high-quality materials. The PCB is made of precision, the thickness of the copper material is thickened to 1oz, the gold plated content of the gold finger is sufficient, and the gold plated foot has good electrical conductivity, which can reduce the blue screen of crash caused by the increase of oxidation and rust resistance. Stable at full speed, no speed reduction required, and no compatibility issues.
The wire used in the product is very durable. Use PCB gaskets with a thickness of 3mm at the metal welding point, and lock the screws and hexagonal nuts to fasten the product. The product is strong and reliable, resistant to pulling, anti-interference, and will not break the wire. The nail drop problem. The wire can be bent or folded without affecting the use.