8+2 8-Port 10/100M IEEE802.3af POE Switch 120W 48V Switch Power over Ethernet for IP Camera System Network Switch

8+2 8-Port 10/100M IEEE802.3af POE Switch 120W 48V Switch Power over Ethernet for IP Camera System Network Switch

The POE Switch POE8808P provides power and data from a single point, using Power over Ethernet (POE) over a single Cat-5 cable. The nine Fast Ethernet ports can be used for any 10/100 Mbps link and four of these ports can supply industry-standard IEEE 802.3af power. Advanced auto-sensing algorithm gives power only to IEEE802.3af end devices, so no need to worry about damaging proprietary POE or non-POE equipment. In addition, it discontinues the power when POE devices are disconnected. Easy and reliable, the POE Switch POE8808P automatically determines POE requirements, speed, duplex, and cable type using Auto Uplink.  

Support VLAN function, if you click it (White button) on, then the transit distance can up to 200 meter, but the transit speed will change into 10 Mbps. if you click it off, transit distance about 100 meter, and the speed is 10/100 Mbps.

Specifications

Network Ports: 10 x 10/100Mbps RJ45 Ports AUTO Negotiation/AUTO MDI/MDIX

Power Pin Assignment: 1 /2(+) and 3/6 (-)POE Distance:  100m

Transmission Method: Store-And-Forward

Network Media: 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m)

100BASE-TX: UTP category 5, 5e cable (maximum 100m)

Performance Specifications  

Bandwidth: 1.6 Gbps

Network latency: Less than 20 s for 64-byte frames in store-and-forward mode for 100 Mbps to 100 Mbps transmission

Buffer memory: 96 KB embedded memory per unit

Address database size: 1,000 media access control (MAC) addresses per system

Addressing: 48-bit MAC address

Mean Time Between Failure (MTBF): 190,000 hours (~ 21 years)

IEEE 802.3af