8-Port 10/100M + 2-Port 10/100/1000M IEEE802.3af 120W 48V POE Switch Power over Ethernet For IP Camera System Network Switch

8-Port 10/100M + 2-Port 10/100/1000M IEEE802.3af 120W 48V POE Switch Power over Ethernet For IP Camera System Network Switch

The POE Switch POE6G1208P provides power and data from a single point, using Power over Ethernet (POE) over a single Cat-5 cable. The five Fast Ethernet ports can be used for any 10/100 Mbps link and four of these ports can supply industry-standard IEEE 802.3af power. Advanced auto-sensing algorithm gives power only to IEEE802.3af end devices, so no need to worry about damaging proprietary POE or non-POE equipment. In addition, it discontinues the power when POE devices are disconnected.

Specifications

Model: POE-6G1208P

Network Ports: 10/100/1000Mbps RJ45 Ports AUTO Negotiation/AUTO MDI/MDIX8 POE 10/100Mbps port +2 uplink 10/100/1000Mbps port

Power Pin Assignment: Data provided over pairs over 1/2and 3/6 ,Power overPower over over pairs 1/2(+) and 3/6 (-)  too.

POE Distance: 100m

Transmission Method: Store-And-Forward

Network Media: 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m)

100BASE-TX: UTP category 5, 5e cable (maximum 100m)

Network Protocol and Standards: IEEE 802.3i 10BASET; IEEE 802.3u 100BASETX

IEEE 802.3x Flow Control; IEEE 802.1at DTE Power via MDI

IEEE 802.3af

Status LED:  System: Power, POE Maximum Power

Per Port: Link, Activity, Speed, POE Active, POE Fault

Bandwidth: 8.8Gbps

Network latency: Less than 20 s for 64-byte frames in store-and-forward mode for 100 Mbps to 100 Mbps transmission

Buffer memory: 96 KB embedded memory per unit

Address database size: 1,000 media access control (MAC) addresses per system

Mean Time Between Failure (MTBF): 190,000 hours (~ 21 years)

General