7+1 Port Gigabit Passive POE Switch 1000Mbps For Networking IP camera WiFi Access Point IP Phone 24V or 48V MikroTik

7+1 Port Gigabit Passive POE Switch 1000Mbps For Networking IP camera     OVERVIEW  

The ZQ-POESG-8-7 Power Source Convenient switch combines an small-high efficiency 8-port10/100 /1000Mbps switch with 7 PoE port .The ZQ-POESG-8-7 PoE switch use an external18VDC to 57VDC power adaptor. All 7 PoE Ethernet ports can provide 30W power cables.The ZQ-POESG-8-7 PoE t allow for data and power to be transmitted over a single Ethernet twisted-pair cable to the attached devices.The ZQ-POESG-8-7 switches is Power SourceEquipment (PSE) and fully compatible with Powered Devices (PD) that  comply with the passivet PoE standard, allowing users to attach any PoE compliant device such as wireless Access Points (APS),VOIP phone, IP camera, printerand Network Attached Storage (NAS) to the PoE Switch without requiring additional power. On a network.The unit is designed with home and small business users in mind and is a cost effective solutionfor environments where AC power is not available or too costly to install.  

Not including power supply and cord   FEATURES  

1.8 switch ports with 10/100/1000Mbs auto detect operation with status LED 2.Available power supply options  

18 volts, 24 volts, 48 volts 56 volts                30 watts, 60 watts, 120 watts                100 to 240 volt AC input, 50 or 60 hz high efficiency 3.7 always on PoE outputs with either Mode A and/or Mode B  

Mode A power and data on pins 12 (-) and 36 (+)                Mode B power or pins 45 (+) and 78 (-) with data on pins 12 ,36,45 and78 4.Dual PTC fuses on each PoE output port  

Redundancy - 48v 802.3af only see text  

LED Indicator  

POWER LED  

INPUT Off (0-18V)              Green (18-37V)                       Rad(38-56V