DisplayPort to DisplayPort HDMI-Compatible Splitter Adapter MST SST Mode 8K@30Hz 4K@120Hz 1 in 2 Out Directional DP1.4 Splitter Dual Monitor for DP and HD Multi Screen simultaneous displays

Warm prompt


1. Need external power supply: when using, please make sure to use USB cable to power the switch.


2. In MST extended mode, HDMI-compatible single port output can reach 8K@30Hz, 4K@120Hz. Displayport single port output can reach 8K@30Hz, 4K@144Hz. Displayport and HDMI-compatible 2 ports can only reach 4K@60hz when output at the same time.


3. When the signal source input adopts Thunderbolt 3 USB C interface, DP and HDMI-Compatible output can only reach 4K.


4. MST mode of Apple system can only extend one screen (limited by iOS System).


5. The splitter does not include DP and HDMI-compatible cables, the cables need to be purchased separately!


If you would like to output 8K@30Hz ,4K@144Hz via our splitter in your displays,please make sure your source devices,your cable and your monitors can all support the resolution and refresh rate you need to output. And used under a single port.For reliability and compatibility, it is recommended to use a DP/HDMI compatible cable to directly connect the splitter, computer and monitor. This Displayport MST SST splitter is not suitable for any docking station and secondary conversion.


Please run it on the computer where the discrete graphics card is installed.It is recommended to use a GTX 20 series or higher graphics card, and the graphics card must support DSC. The integrated graphics device may have compatibility issues with the DP splitter due to video memory limitations and insufficient bit width.




1. Note In MST extended mode, HDMI-compatible single port output can reach 8K@30Hz, 4K@120Hz. Displayport single port output can reach 8K@30Hz, 4K@144Hz. Displayport and HDMI-compatible 2 ports can only reach 4K@60hz when output at the same time


2. When the signal source input adopts Thunderbolt 3 USB C interface, DP and HDMI-Compatible output can only reach 4K


3. Need external power supply: when using, please make sure to use USB cable to power the switch


4. MST mode of Apple system can only extend one screen (limited by iOS System)




1. Comply with DisplayPort 1.4, 1.3, 1.2 and 1.0 specifications


2. Compatible with all DP inputs and HDMI-CompatibleDP outputs


3. Support Compatible resolution:


8K@30Hz.


4K@144Hz120Hz60Hz


1440P@165Hz 144Hz120Hz60Hz.(HDMI does not support 165hz, 144hz output)


1080P@240Hz 165Hz144Hz120Hz60Hz. (HDMI does not support 165hz, 144hz output)


4. Support operating system: IOS system, windows system,Android system


5. Support HDR,Support SST (mirror) and MST (Extended) mode, Support 4:4:4, 4:2:2, 4:2:0





1.Input Port: 1 x DP Female, 1 x USB Micro B Female


2.Output Port: 1 x DP Female, 1 x HDMI-Compatible A Female


3.Bandwidth:32.4Gbps


4.Operating Temperature:-15~55/5°F~131°F


5.Deep Color:8bit/10bit/12bit


6.Chroma: 4:2:0 / 4:2:2 / 4:4:4


7.Chassis: Aluminium alloy Shell


8.Dimension:7.0mm(L)x51.7mm(W)x13.0mm(H)


9.Weight:83.0g




INTRODUCTION


This super slim DP to DP+HDMI-Compatible splitter is compact and efficient.


It allows you to assign a high-definition source to one monitor and one TV at the same time without any signal los.


The system is compatible with DP 1 . 4 1 . 3 1 . 2 1 . 0 and HDMI-Compatible 2 . 1 2 . 0 1 . 4 1 . 3 , Support 3 Dand 4K 8K ultra HD , Support SST and MST.


This splitter is ideal for home, office, school, hotel and any other installation that requires 2 ultra-high source display devices.



FEATURES


1. Compatible with all DP inputs and HDMI-CompatibleDP outputs.


2. Comply with DisplayPort 1.4, 1.3, 1.2 and 1.0 specifications.


3. Support Compatible resolution:


8K@30Hz 4K@144Hz120Hz60Hz 1440P@165Hz 144Hz120Hz60Hz(165hz, 144hz HDMI-Compatible output not supported)


1080P@240Hz 165Hz144Hz120Hz60Hz(165hz, 144hz HDMI-Compatible output not supported)


((Depends on your graphics card, monitor, TV, operating system and DP cable, HDMI-Compatible cable support))


4. Support operating system: IOS system, windows system,Android system


5. Support HDR


6. Support SST (mirror) and MST (Extended) mode


7. Support 4:4:4, 4:2:2, 4:2:0



SPECIFICATION


Input Port: 1 x DP Female, 1 x USB Micro B Female


Output Port: 1 x DP Female, 1 x HDMI-Compatible A Female


Bandwidth:32.4Gbps


Operating Temperature:-15~55/5°F~131°F


Deep Color:8bit/10bit/12bit


Chroma: 4:2:0 / 4:2:2 / 4:4:4


Chassis: Aluminium alloy Shell


Dimension:7.0mm(L)x51.7mm(W)x13.0mm(H)


Weight:83.0g



PACKAGE CONTENTS


1. 1 x DP to DP+HDMI-Compatible Splitter


2. 1 x USB a to USB micro B cable


3. 1 x User manual