1 to 5 Hard Disk Adapter Card Motherboard Port Multiplier Support 3.0 Expansion Card

1 to 5 Hard Disk Adapter Card Motherboard Port Multiplier Support 3.0 Expansion Card

descriptionmaterial: metalcolor: blueSize: 10cmX 5.5cm X1.2cmInterface: 7PINData transmission speed: 3000 (MB/s)Chip: JMicrometer JMB321Length: 0.4 (m)Precautions:1. This expansion card must support the PM ( PORT MULTIPLIER) function on the motherboard or the expansion card to recognize 5 hard disks. The general motherboard does not support this function. If not, only one card can be recognized.2. Must use the small 4PIN power plugWiring:Small 4PIN power plug, the input cable is inserted into the motherboard or expansion card.Features:Supports 6-port 3.0Gbps II interfaceOutput swing control and automatic impedance calibration for II PHYSupports asynchronous signal recoverySupports spread spectrum clockingSupports partial / slumber power saving modeAutomatically speed negotiationSupports BIST and loopback modeSupports staggered spin-up (Optional)Supports Hot-PlugSupports asynchronous notificationSupports ATAPI drivesSupports command-based and FIS-based switchingSupports PM aware and non-PM aware hostSupports cascaded modePackage Contents:1 x 1 to 5 expansion card1 x power cable1 x USB1.A turn 5 port multiplier support for up to five hard drives. It provides expansion ports, data protection and summarized in a variety of different applications performance.2.Support 1.5 Gbit / s or 3.0 Gbit / s transmission speed3.Support hot swapUse JMB321 chip4.Mainframe computer terminal (Host), must be supported by port multiplier ( Port Multiplier) function motherboard or expansion card.