================ INTRODUCTION ================ Rotary evaporators are distillation units that incorporate an efficient condenser with a rotary flask system. As the flask containing the solvent is rotated it continually transfers a thin layer of liquid over the entire inner surface. This gives a very large surface area for evaporation that is effected by heating from the accessory water or oil bath. The solvent steam is cooled by a high efficiency glass condenser and recovered in the collection bottle, which greatly improves the evaporation efficiency, especially for the concentration and purification of the biologic which are easily decomposed at high temperature.
================ PARAMETERS ================ 50L
Rotary Evaporator Model: R1050
Rotating bottle capacity: 50L
Receiving bottle capacity: 20L
Working power supply: Three phase 220-240V/380V/60Hz
Condenser tube: Vertical double coil, Main-condenser +
Sub-condenser Evaporation capacity: Water >= 9L/h, Alcohol >= 19L/h
Water bath pot material: Stainless steel
Water bath pot size: f550×320 (mm)
Lifting mode: Electric + hand lift
Optimum ambient temperature: 5°C~35°C
Lift stroke: 0~180mm
Whole power: 4KW(220-240V)
Outline dimension: 1320×770×2340 (mm)
Main engine speed: 20~110 (RPM)
Rotary electric machine: Brushless 250W
Main engine speed control: Digital frequency conversion stepless speed regulation >>>> 50L
Refrigerated circulator Model: DLSB50/30
Volume: 50L
No load minimum temperature: -32°C
Refrigerant Capacity: 7549-3540W
Flow: 30L/min
Lift: 10-12m
Tmeperature Range: -30°C
Temperature Precision: ± 0.2 °C
Power Supply: 220V (110V or 380V optional)
Environment Temperature: 25°C
Environment Humidity: 60-80%
Ventilation Machine Dimension: 700×600×980 (mm) >>>> Five Air Suction Hole Water circulating vacuum pump
Model: SHZ-C (5)
Voltage: 220V (110V optional)
Flow: 80
L/m Lift: 12 m Max.
Vacuum Degree: 0.098 MPa Sucking Rate for
Each Tap: 10 L/min Water
Tank Capacity: 50
L Power: 370W
Body material: Anti-corrosive Material, static spraying