Non-standard customization HNZXIB 60L Stainless Steel Jacketed Reactor Stirring Kettle Sealed Thermostatic Extraction Reaction with Observing window

Introduction Stainless steel mixing tanks can also be called water phase tanks, extraction concentrate tanks, sandwich (coil) heating tanks, steam tanks, condensation tanks, crystallization tanks, stirred tanks, enzymatic tanks, etc., which are widely used in coatings, pharmaceuticals, building materials, chemicals, pigments., resin, food, scientific research and other industries. The equipment can be made of carbon steel, stainless steel and other materials according to the process requirements of the user's products, as well as heating and cooling devices to meet different process and production needs.

The equipment has reasonable structural design, advanced technology and durability, and has the characteristics of simple operation and convenient use. It is an ideal chemical equipment with less investment, fast production and good profit. Custom guide Stainless steel mixing tank structure The stainless steel stirring tank is composed of a stirring tank body, a stirring tank lid, a stirrer, a support, a transmission device, a shaft sealing device, etc., and a heating device or a cooling device can also be configured according to the process requirements.

The stainless steel stirred tank and the stirred tank lid can be flanged or welded. The mixing tank and the stirring tank lid can be used to open the feed, discharge, observation, temperature measurement, pressure measurement, steam fractionation, safe venting and other process tube holes according to the process requirements. A transmission device (motor or reducer) is arranged on the upper part of the stainless steel stirring tank cover, and the agitator in the stirring tank is driven by the transmission shaft. The shaft sealing device can be in various forms such as machine seal or packing, labyrinth seal, etc.

(determined according to user needs). The agitator can be configured in various forms such as slurry, anchor, frame, and spiral. Heating device or cooling device Heating forms include jacketed electric heating, coil heating, steam heating, and heat transfer oil heating. Generally, the unit is used depending on whether the material is heated or dried or cooled. Within the custom range, the temperature should be below 230 ° C and the pressure used should be less than 0.1 MPa. The heating method can be determined according to the production conditions of the unit of use.

Heating methods include medium circulation such as hot oil and direct electric heating. The medium circulation of hot oil or the like is that the heat transfer oil is heated to a certain temperature in a separately arranged heating tank, and is transported by a hot oil pump; the direct heating is to directly install an electric heating tube on the jacket to heat the heat transfer oil to a desired temperature ( The temperature can be adjusted according to the actual situation). The cooling cycle uses water to circulate inside and outside the jacket so that the material does not cause agglomeration or stickiness at a certain temperature.