BONAEVER SATA / IDE to USB 3.0 Adapter Hard Drive Reader for Universal 2.5 3.5-Inch IDE SATA External HDD/SSD with 12V 2A Power Supply Support 6TB

Features:

Easy Way to Access Old Hard Drives: It's good for reading hard drives from old desktops and laptops. You simply plug in the power and data port and up pops file explorer to access. ide to usb adapter support 2.5 "/3.5" SATA HDD and SSD; 2.5 "/3.5" IDE HDD; DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD + RW Optical Drive

SuperSpeed up to 5Gbps with UASP: Hard drive reader support 5Gbps high-speed transfer rate (up to 10x as fast as USB 2.0), which is 70% Faster than traditional USB 3.0 and 80% reduction in required processor resources, Backward compatible with USB 2.0 / 1.1. limit depend on the IDE device/SATA device and the driver

Supports HDD Capacity Up to 6TB: hard drive to usb adapter supports a hard drive capacity of Up to 6TB capacity. it has 3 different ports for 2 different IDE pin configurations (40pin and 44pin) and 1 SATA; Tips: For some old hard drive, you need to set the jumper to turn on the disk(set the master disk and the slave disk)

Wide Compatibility, Plug-and-play: This Universal hard drive adapter is plug and plays when using Windows 7, 8,10, Mac OS 9/ 10, Linux; plug and Play without Rebooting. work well with Xbox, Western Digital, Seagate, Fujitsu, Samsung hard drives, etc

Comes with 12V 2A Power Supply: USB to sata adapter with external AC power adapter, for power up the 5V/12V IDE devices usage, ensures SATA HDD can be connected well. 4pin power cable is designed for a 3.5’’ IDE drive; LED light shows power and activity status

Comes with USB c to USB Adapter: Whether you are using a MacBook Pro/MacBook Air/Chromebook/other laptops with a USB Type-C port, this USB-c to USB adapter can be plugged into a USB C port at the same time, finish perfectly matches your laptop

IDE/SATA to USB 3.0 Adapter-Connect a removing internal hard drive to a usb port to read the data and use this as an external drive

USB 3.0 to IDE / SATA hard drive reader universal implements a bridge between a USB port and one SATA, ATA, or ATAPI-based mass storage device port. Suitable for Professional and Home Use With the need for data security and data recovery. This USB hard drive adapter could turn any standard 2.5" 3.5" IDE or SATA drive into a convenient external drive. Easily transfer files from computer or notebook, backup files, or store large file archives on hard drives.

The Hi-Speed(5Gbps) USB interface provides for easy installation with its Plug and Play design. The IDE to USB adapter supports all existing IDE/ATAPI devices such as a CD-ROM, CD-RW, DVD-ROM, and 2.5 and 3.5 IDE and SATA hard drives. The included external power adapter will allow you to power your drives outside your system giving you the ability to quickly add or swap between drives without opening your case. The SATA/IDE-USB adapter incorporates 3 interfaces to 1 USB adapter

Universal USB 3.0 to IDE/SATA converter with power switch

Features:
Two IDE Connector (one 2.5" and one 3.5") plus one SATA III Connector Supports Standard Desktop 2.5"/3.5" SATA Hard Drives or SSD
Supports hard drives up to 6TB
Plug and play, no drivers needed. On/Off power switch
LED light indicates Power and Activity status
Supports most DVD/CD drives equipped with an IDE or SATA interface
Supports Transfer Speeds up to 5Gbps (USB 3.0),480Mbps (USB 2.0), 12Mbps (USB 1.1)

System requirements:
Windows 11
Windows 10
Windows 8.1/8
Windows 7
Windows Vista above
Mac OS 8.6 or above
Linux

Package Contents
1 x USB 3.0 to SATA /IDE converter
1 x USB 3.0 male to male cable 3ft
1 x Simple users manual
1 x 12V/2A power supply: can power larger form-factor SATA drives or IDE drives and likely others.
1 x 4Pin Molex cable: When using the older parallel IDE connection
1 x USB C to USB Adapter: compatible with most of laptops, tablets with a USB Type C port