WENLII High Speed Case Externo Sata to USB 3.0 3.5 External Hard Drive HDD Docking Station Sata Aluminum 1 Bay

A premium dock for your 2.5" and 3.5" hard and solid state drives.
Due to its spring design, this docking station holds both your 2.5" and 3.5" HDD or SSD firmly in place.
Moreover, all SATA standards (SATA, SATA II, SATA III).
Equipped with both USB 3.0 , this docking station delivers Super Speed of up to 5Gbps.
Transfer your data in just minutes, instead of hours and have more time to do what you want.
Instead of complicated screws to work with, our docking station just snaps in place, holding your hard drive firmly and securely.
The LED indicator with two colors reveals power status and data activity.
What's more, a power button lets you disconnect to protect your data when not in use, instead of unplugging the power cable.
Your drive cannot be accessed via both eSATA and USB 3.0 at the same time. If both are connected,
Do not attempt to remove your HDD or SSD device while it is active. Please power off the docking station before removing.
The following Seagate SATA drive models will require a firmware upgrade, downloadable from the Seagate official site, before use:
ST3000DM001/9YN166/3TB
ST2500DM001/9YN16L/2.5TB
ST2000DM001/9YN164/2TB
ST1000DM003/9YN162/1TB
ST500DM005
Note for Mountain Lion (10.8) users: If you are experiencing formatting problems, please note that this is unrelated to our dock's performance. You may try reformatting your disk to the FAT32 format on using another operating system.
Package list:
1x HDD Docking Station
The transmission speed of connecting U disk / hard disk can be up to 200M/s