B-EXV-X-V2 Exhaust valve,plug/Vent/Pressure relief/Air evacuation/Automatic manual integration,Clover pattern water coole

It is recommended to install in the upper part of the tank.

As the internal pressure discharge device of the water cooling system, be sure to install it in the water inlet.

When the front button is pressed, it will be in a non-sealed exhaust state.

If it is installed in the lower nozzle at this time, it will cause the water to overflow.

This product is used for water pressure relief.

The operation of the water cooling system is generally closed.

As the temperature of the cold liquid rises, an internal pressure is generated.

The internal pressure increases the compressive bearing capacity of each joint.

Indirectly affect system usage.

By releasing the internal pressure, it is possible to improve the stability of the water cooling system and obtain the best condition for low pressure operation.

Press the front button to manually vent the large flow.

During the operation of the system, the built-in hydrophobic filter element fittings will automatically act to release the exhaust gas and prevent water molecules from passing through.

Operation instructions: Press the front button to vent, release the button to automatically reset the seal.

With automatic release and exhaust function.