3D Print pen printing pen for school students children 3D Graffiti pen-Blue

Product description:
1: Look at the temperature, adjust the temperature anytime, anywhere, convenient and fast, three-dimensional painting low temperature printing 2: Using ABS and PLA consumables, PLA is colorless, odorless, non-toxic, healthy
and environmentally friendly 3: used for children's 3D stereo painting production, develop imagination, free to paint
Specifications:
1.
Discharge method: hot melt extrusion stacking
2.
Forming method: three-dimensional molding
3.
Print range: no limit
4.
Spinning speed: adjustable
5.
Printing consumables: ABS/PLA 1.75 mm material
6.
Heating temperature: 160-250 degrees
7.
Equipment working voltage: 5V 2A
8.
Nozzle direct: 0.7 mm
9.
Product material: plastic shell 3D printing pen operation method:
1. Insert the power supply;
2. The display lights up;
3. Select the consumable mode ABS/PLA;
4. First adjust the shift key to the maximum;
5. Press the discharge button to heat up;
6. When the heating is completed, the green light will be on, then insert the consumables with one hand and press the discharge button.
7. Until the pen is out, you can start painting.
Packing List: 1 X 3D print pen 1 X US plugadapter 1 X Manual 1 X Base 1 X 10ft 3 color (random-color) PLA consumables
Care instructions:
1. This pen presses the feed button to spin the wire, press the feed button to stop. If you press the return button, please completely remove the consumables from the pen. Use scissors to cut the consumables to a uniform diameter and feed them. Otherwise, the feeding will not be smooth, and the pen will be blocked, which will make the pen unusable.
2. When a piece of consumables is not as long as the pen is long, it is best to quit and discard it. Because the length is not as long as the pen length, the consumables are transmitted through the motor. When the transmission is not strong, the consumables are not easy to come out, causing the plug.
3. Be sure to withdraw all consumables from the pen before drawing the power. Remember to remember. Otherwise, the consumables will not be pulled out when they are cooled in the pen. Only the pen can be removed for repair.
4. Don't blindly operate if you encounter problems. If you have any questions, please contact the seller at the first time. We will give you a satisfactory answer.