Blazing read/write speed
TEAMGROUP EX2 2.5" SSD has evolved from GX2, using SATA III 6Gbps specification and the read/write speed reaches up to 550MB/520MB[1]. With blazing sequential transfer performance, even small files can be operated with high performance.
Optimized performance
It supports Windows TRIM optimization command which is able to release free blocks, allowing operating system to use them immediately when writing data. This can speed up the read/write performance of the SSD, and also effectively reduce performance degradation, keeping the performance running perfectly.
Complete lineup of capacities
EX2 has capacities available in 512GB and 1TB to satisfy all your needs, whether you are looking for a system drive or gaming drive.
Trustworthy reliability
The powerful Wear-Leveling technology and ECC (Error Correction Code) function ensure the reliability of data transfer and prolong the service life of the solid state drive.
Specification
Interface | SATA Rev. 3.0 (6Gb/s) - with backwards compatibility with SATA Rev. 2.0 |
Capacity | 512GB / 1TB / 2TB[2] |
Voltage | DC +5V |
Operation Temperature | 0℃ ~ 70℃ |
Storage Temperature | -40℃ ~ 85℃ |
Terabyte Written | 512GB / >400TB 1TB / >800TB 2TB / >1600TB[3] |
Performance | Crystal Disk Mark: Read: Up to 550MB/s Max ; Write: 520MB/s[4] |
Dimensions | 100(L) x 69.9(W) x 7(H) mm |
Humidity | 0℃ ~ 55℃ / 5% ~ 95% RH, non-condensing |
Vibration | 20G (non-operating) |
Shock | 1,500G |
MTBF | 1,000,000 hours |
Operating System |
|
Warranty | 3-year limited warranty |
[1] Transmission speed will vary according to different hardware/software conditions, therefore the data can only use for basic reference.
[2] 1GB=1,000,000,000 Bytes. In OS system, it would be displayed as 1,000,000,000 Bytes/1024/1024/1024 = 0.93GB
[3] Definition and conditions of TBW (Terabytes Written) are based on JEDEC standard
*We reserve the right to modify product specifications without prior notice. Different devices may have a different best format for usage. It is recommended to format the device before use to ensure the correctness and the integrity of the SSD.