TelDaykemei 4 Port Waterproof POE Repeater 10/100Mbps Outdoor Network POE Extender IP55 VLAN 44-57V 30W IEEE802.3af for POE System Camera

Product Description
1. Comply with IEEE 802. af Power over Ethernet (10/100M Supported)
Extender the range of PoE an additional 100 meters
2. Automatically detects and protects PoE equipment from being damaged by incorrect installation
3. Plug-and Play no configuration required
4.3 -Port PoE extender can forward both Ethernet and PoE power for 1 terminal equipment via Cat5, Cat5e, Cat6, Cat6e, UTP cable.
5.3 -Port PoE Extender has 3 10/100M Lan ports, among them, one for power input, the other three for power output. Comply with 10/100/1000 BASE-TX, IEEE 802.3 af-PoE.
6. Used with AP, IP camera, IP telephone and the other network equipment in the situation of the lack of power line or far away from the power outlets
7. Installed at hotels, schools, buildings, villages, etc.
Specification
Network standard: IEEE 802.3, IEEE 802.3 u, IEEE 802.3 x
PoE connection standard: IEEE 802.3 af/at
PoE port input power: input maximum 30W
PoE port output power: output maximum 24W/average 8W per port
PoE power receiving input transmission core: 1/2+, 3/6-, 4/5+, 7/8-
PoE power output transmission core: 1/2+, 3/6-
POE power supply transmission distance: 100 meters
Power supply transmission medium:
10/100/1000BASE-TX: Category 5 and above non-screen shielded twisted pair
MAC Address Table: 2K
Packet Buffer Memory: 48 Byte
Switching Capacity: 1.0G bps
Network Protocol: IEEE 802.3 i-10BASE-T, IEEE
802.3 u: 100BASE-TX, IEEE 802.3 x-Flow Control, IEEE 802.3 af-Power over Ethernet;
Regulation Compliance: FCC Part 15B, ROHS Directive 2011/65/EU, Low Voltage Directive 2014/35/EU, EMC Directive 2004/108/EC;
Working temperature: -10°c to 55°c
Working Humidity: 10%~90%, No Condensation;